/build/static/layout/Breadcrumb_cap_w.png

port settings

I need to change port settings for the hardware IT 4600 Area Manager COM 3.
My Job is to change Bits Persecond to 128000 in port settings.I'm trying to find the registry entry which changes that but i couldn't .any ideas pls let me know...
Thanks
Harsha.

0 Comments   [ + ] Show comments

Answers (15)

Posted by: cygan 11 years ago
Fifth Degree Brown Belt
0
can you not use a light weight tool to find the registry settings ie installrite,regmon, procmon etc or even wise/ installshield capture
Posted by: harshakola 11 years ago
Orange Belt
0
I found the registry entry .I'm done with that.The place where i'm strugguling is i need to install scanner drivers silent i use to get popup message as found newhardware.I'm working using DPinst,If u have any ideas abt this let me know.Thanks
Posted by: anonymous_9363 11 years ago
Red Belt
0
This subject has been done to death and I, for one, have no intention of repeating the advice which is already available in abundance here on AppDeploy. Use the 'Search' facility and look for DPINST.

If you're also getting the dialog which prompts you to 'Continue anyway?', search also for 'driver signing'.
Posted by: cygan 11 years ago
Fifth Degree Brown Belt
0
I found the registry entry .I'm done with that.The place where i'm strugguling is i need to install scanner drivers silent i use to get popup message as found newhardware.I'm working using DPinst,If u have any ideas abt this let me know.Thanks


ian has given you the answers to that as there is lots of info on device drivers on this site
Posted by: harshakola 11 years ago
Orange Belt
0
hi
i tried using dpinst but this doesn't work. i've followed all the screen shots posted for packaging drivers using wise package studio.still i use to get the messages found new hardware.i've even cross checked setupapp.log file i found an error message proper device drivers hasn't been installed.pls let me know what to do..
Thanks in advance...
Harsha.
Posted by: anonymous_9363 11 years ago
Red Belt
0
i found an error message proper device drivers hasn't been installedThis kind of response will get you nowhere. It's like taking your car to the garage and saying "It makes a noise. Can you fix it?"

What - exactly - does the error message say?
Posted by: harshakola 11 years ago
Orange Belt
0
Hi Itried every thing did google and appdeploy but it doesn't work for me.I use to work with Wise Package Studio i'm packaging SQN Scanner Drivers.Let me explain what i did
I've opened a windows installer and took the pre define template for drivers.
I've created a folder called SQN Scanner drivers on C:\ Drive and copied all set of the files what i got .cat,.sys.inf.dll everything in to this folder.
Then gone to the merge module table and checked the box for module DIFx
then i went to the inf file in c:\SQN Scanner Drivers and went to the details tab and checked the box Use merge module.
But it was showing me a pop window new hardware found???i'm n't suppose to get this message My target is to install the application by using C:\SQN Scannerdrivers in silent mode.with out thos e windows.

Here are my questions??
i dont want to certify my file because it has a cat file which means it's certified.
When i have installed the app its getting installed but i can't see in the controlpanel as it got installed???How do we know Whether its getting installed or not???
when i insert USB Scanner It popping up with hardware wizard??
I have gone through Setupapp.log file and checked the message its saying driver not found i'm pasting my log file too..My log file is too large so i'm sending up last few lines where we look for error message.

#-199 Executing "C:\WINDOWS\system32\rundll32.exe" with command line: rundll32 C:\WINDOWS\system32\msjava.dll,JavaPkgMgr_Install C:\WINDOWS\Java\classes\xmldso.cab,0,0,0,0,4,282
#-024 Copying file "C:\DOCUME~1\xu96580\LOCALS~1\Temp\ICD1.tmp\Microsoft XML Parser for Java.osd" to "C:\WINDOWS\Downloaded Program Files\Microsoft XML Parser for Java.osd".
#E361 An unsigned or incorrectly signed file "C:\DOCUME~1\xu96580\LOCALS~1\Temp\ICD1.tmp\Microsoft XML Parser for Java.osd" will be installed (Policy=Ignore). Error 0x800b0100: No signature was present in the subject.
[2010/07/29 16:05:02 732.3 Driver Install]
#-019 Searching for hardware ID(s): usb\vid_0536&pid_020a&rev_0076,usb\vid_0536&pid_020a
#-018 Searching for compatible ID(s): usb\class_02&subclass_02&prot_01,usb\class_02&subclass_02,usb\class_02
#-198 Command line processed: C:\WINDOWS\system32\services.exe
#I393 Modified INF cache "C:\WINDOWS\inf\INFCACHE.1".
#-166 Device install function: DIF_SELECTBESTCOMPATDRV.
#W059 Selecting best compatible driver failed. Error 0xe0000228: There are no compatible drivers for this device.
#W157 Default installer failed. Error 0xe0000228: There are no compatible drivers for this device.
[2010/07/29 16:05:04 1932.2]
#-199 Executing "C:\WINDOWS\system32\rundll32.exe" with command line: rundll32.exe newdev.dll,ClientSideInstall \\.\pipe\PNP_Device_Install_Pipe_0.{8B0AE723-3731-4B22-9C35-A3C18E9898DA}
#I060 Set selected driver.
#-019 Searching for hardware ID(s): usb\vid_0536&pid_020a&rev_0076,usb\vid_0536&pid_020a
#-018 Searching for compatible ID(s): usb\class_02&subclass_02&prot_01,usb\class_02&subclass_02,usb\class_02
#-166 Device install function: DIF_SELECTBESTCOMPATDRV.
#W059 Selecting best compatible driver failed. Error 0xe0000228: There are no compatible drivers for this device.
#W157 Default installer failed. Error 0xe0000228: There are no compatible drivers for this device.
this is my .inf file...
; Installation file for Honeywell Imaging and Mobility: USB COM Port emulation Interface
; Revision control info:
; $Source: Source/HHPCDC/ReleaseDistribution/hhpcdc.inf $
; $Author: RosettiJ $
; $Revision: 1.19 $
; $ProjectRevision: 1.11.1.5 $
; Copyright (C) 2008 by Honeywell International Inc.
; All rights reserved

[Version]
Signature=$CHICAGO$
Class=Ports
ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}
Provider=%MFGNAME%
CatalogFile=hhpcdc.cat
DriverVer=05/09/2008,1.16.0.00

[ControlFlags]
ExcludeFromSelect=*

[Manufacturer]
%MFGNAME%=DeviceList

[DestinationDirs]
DefaultDestDir=10,System32\Drivers
StubCopyFiles=11
VxdCopyFiles=11

[SourceDisksFiles]
hhpcdc.sys=1
hhpcdc98.sys=1
wdmstub.sys=1
hhpprtno.dll=1

[SourceDisksNames]
1=%INSTDISK%,,,

[DeviceList]
%DESCRIPTION380015%=DriverInstall,USB\VID_0536&PID_010A
%DESCRIPTION380014%=DriverInstall,USB\VID_0536&PID_012A
%DESCRIPTION5600%=DriverInstall,USB\VID_0536&PID_016A
%DESCRIPTION5800%=DriverInstall,USB\VID_0536&PID_018A
; Some early 4600's had this PID but now its used solely on D9500's
%DESCRIPTION4600%=DriverInstall,USB\VID_0536&PID_01AA
%DESCRIPTION4800%=DriverInstall,USB\VID_0536&PID_01CA
%DESCRIPTION4010%=DriverInstall,USB\VID_0536&PID_01EA
%DESCRIPTION4600%=DriverInstall,USB\VID_0536&PID_020A
%DESCRIPTION4080%=DriverInstall,USB\VID_0536&PID_022A
%DESCRIPTION2020%=DriverInstall,USB\VID_0536&PID_026A
%DESCRIPTION4200%=DriverInstall,USB\VID_0536&PID_028A
%DESCRIPTIONGeneric%=DriverInstall,USB\VID_0536&PID_02AA
%DESCRIPTIONQC890%=DriverInstall,USB\VID_0536&PID_02CA
%DESCRIPTION3800G%=DriverInstall,USB\VID_0536&PID_02EA
%DESCRIPTION5180%=DriverInstall,USB\VID_0536&PID_030A
%DESCRIPTION5110%=DriverInstall,USB\VID_0536&PID_032A
%DESCRIPTION4800G%=DriverInstall,USB\VID_0536&PID_034A
%DESCRIPTION3800r%=DriverInstall,USB\VID_0536&PID_040A
%DESCRIPTION3800i%=DriverInstall,USB\VID_0536&PID_042A
%DESCRIPTION4600g%=DriverInstall,USB\VID_0536&PID_044A
%DESCRIPTION4800i%=DriverInstall,USB\VID_0536&PID_046A
%DESCRIPTION2020x%=DriverInstall,USB\VID_0536&PID_048A
%DESCRIPTION4206%=DriverInstall,USB\VID_0536&PID_04AA
%DESCRIPTION4600r%=DriverInstall,USB\VID_0536&PID_04CA
%DESCRIPTION4800dr%=DriverInstall,USB\VID_0536&PID_04EA
%DESCRIPTION2820%=DriverInstall,USB\VID_0536&PID_050A
%DESCRIPTION4800P%=DriverInstall,USB\VID_0536&PID_052A
%DESCRIPTION4810WA%=DriverInstall,USB\VID_0536&PID_054A
%DESCRIPTION5385%=DriverInstall,USB\VID_0536&PID_056A

%PORTDESC%=PortInstall,HHPCDC98\VIRTPORT

;------------------------------------------------------------------------------
; Windows 2000/XP Sections
;------------------------------------------------------------------------------

[DriverInstall.ntx86]
CopyFiles=DriverCopyFiles.ntx86
AddReg=PortAddReg.ntx86

[DriverCopyFiles.ntx86]
hhpcdc.sys,,,2

[DriverInstall.ntx86.Services]
AddService=HHPCDC,2,DriverService,EventLogging

[DriverService]
ServiceType=1
StartType=3
ErrorControl=1
ServiceBinary=%10%\system32\drivers\hhpcdc.sys

[EventLogging]
AddReg=EventLogAddReg

[EventLogAddReg]
HKR,,EventMessageFile,0x00020000,"%10%\System32\iologmsg.dll;%10%\system32\drivers\hhpcdc.sys"
HKR,,TypesSupported,0x00010001,7

[PortAddReg.ntx86]
HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"

[DriverInstall.ntx86.hw]
AddReg=DriverHwAddReg

[DriverHwAddReg]

;------------------------------------------------------------------------------
; Windows 98/Me Sections
;------------------------------------------------------------------------------

[DriverInstall]
AddReg=DriverAddReg
CopyFiles=DriverCopyFiles,StubCopyFiles
DriverVer=05/17/2005,1.12.0.0


[DriverCopyFiles]
hhpcdc98.sys,,,2

[DriverAddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,"wdmstub.sys,hhpcdc98.sys"

[StubCopyFiles]
wdmstub.sys,,,2

[DriverInstall.HW]
AddReg=DriverHwAddReg

;------------------------------------------------------------------------------
; Placeholder sections for virtual port pseudo-device (Windows 98 & Me)
;------------------------------------------------------------------------------

[PortInstall]
AddReg=PortAddReg
CopyFiles=VxdCopyFiles

[VxdCopyFiles]
hhpstub.vxd,,,2
hhpprtno.dll,,,2

[PortAddReg]
HKR,,DevLoader,,*vcomm
HKR,,PortDriver,,hhpstub.vxd
HKR,,PortSubClass,1,01
HKR,,ConfigDialog,,serialui.dll
HKR,,EnumPropPages,,"hhpprtno.dll,PortEnumPropPages"
;HKR,,Enumerator,,serenum.vxd
HKR,,DCB,3,1C,00,00,00, 80,25,00,00, 11,33,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00
; DCBLength 0000001c
; BaudRate 00002580 [9600]
; BitMask 00003311 [fDTRFlow + fRTSFlow + fInX + fOutX + fOutXDSRFlow + fBinary]
; Reserved 0000
; XonLim 000a
; XOffLim 000a
; ByteSize 08
; Parity 00
; XonChar 11
; XoffChar 13
; ErrorChar 00
; EofChar 00
; EvtChar 00

;------------------------------------------------------------------------------
; String Definitions
;------------------------------------------------------------------------------

[Strings]
MFGNAME="Honeywell International Inc."
INSTDISK="Honeywell International Inc. Installation Disc"
DESCRIPTION380014="IT3800-14 Linear Imager"
DESCRIPTION380015="IT3800-15 Linear Imager"
DESCRIPTION5600="IT5600 Linear Imager"
DESCRIPTION5800="IT5800 Linear Imager"
DESCRIPTION4600="IT4600 Area Imager"
DESCRIPTION4800="IT4800 Area Imager"
DESCRIPTION4010="IT4010 Area Imager"
DESCRIPTION4080="IT4080 Area Imager"
DESCRIPTION2020="IT2020 Cordless Base"
DESCRIPTION4200="IT4200 Area Imager"
DESCRIPTIONGeneric="Honeywell Imager"
DESCRIPTIONQC890="QC890 Verifier"
DESCRIPTION3800G="3800G Linear Imager"
DESCRIPTION5180="5180 Area Imager"
DESCRIPTION5110="5110 Area Imager"
DESCRIPTION4800G="4800G Area Imager"
DESCRIPTION3800r="3800r Linear Imager"
DESCRIPTION3800i="3800i Linear Imager"
DESCRIPTION4600g="4600g 2D Imager"
DESCRIPTION4800i="4800i 2D Imager"
DESCRIPTION2020x="2020 Cordless Base"
DESCRIPTION4206="4206 2D Imager"
DESCRIPTION4600r="4600r 2D Imager"
DESCRIPTION4800dr="4800dr Document Reader"
DESCRIPTION2820="2820 Cordless Base"
DESCRIPTION4800P="4800P 2D Imager"
DESCRIPTION4810WA="4810WA 2D Imager"
DESCRIPTION5385="5385 2D Imager"


PORTDESC="Honeywell Com Port Emulation"

Pls let me know what to do....Its Very Urgent...


THough my post is too big pls feel this my Problem Angel I've seen ur posts related to this BUt i doesn't work me.You r really an angel and help me with this issue.
Posted by: anonymous_9363 11 years ago
Red Belt
0
At least part of the problem seems to be that you have a CAT file and a reference to a CAT file in your INF and yet the log says that the driver is unsigned or incorrectly signed. Also, it's not entirely unknown for manufacturers to foul up their INFs (although this one seems to be system-generated).

Here is a Microsoft document to help you decipher SETUPAPI.LOG. It will be worth deleting any existing copy before you start, to make its size more manageable.

Lastly, please use the CODE tag to post lengthy text. You can edit your post to include that tag by clicking the 'Edit' link.
Posted by: harshakola 11 years ago
Orange Belt
0
Hi I'm n't clear with the answers provided by you can u answer the Following Questions for me

i dont want to certify my file because it has a cat file which means it's certified.
When i have installed the app its getting installed but i can't see in the controlpanel as it got installed???How do we know Whether its getting installed or not???
when i insert USB Scanner It popping up with hardware wizard??
I have gone through Setupapp.log file and checked the message its saying driver not found i'm pasting my log file too..My log file is too large so i'm sending up last few lines where we look for error message.

The other thing is just look at the steps what i'm doing and let me know where i'm making mistake.The steps what i've followed wwere posted in my previous post.
Please provide us a clear answer...
ANGEL looking for your reply.You ar the one like an Angel to help us with these issues.
Thanks..
Posted by: anonymous_9363 11 years ago
Red Belt
0
>i dont want to certify my file because it has a cat file which means it's certified.
That was my point! That file is, in effect, the file's "signature". That *should* mean that it's signed but the log says that the file isn't signed or that the signature is invalid. You need to either take that up with the vendor or self-sign it. If my experience is anything to go by, you will probably have retired before you get to speak to someone at the vendor who even understands what you're talking about. So, in your shoes, I'd copy the CAT file somewhere safe, then self-sign the driver file. There's plenty in the archive about how to do that.

>When i have installed the app its getting installed but i can't see in the controlpanel as it got installed???How do we >know Whether its getting installed or not???
What "app"? We're talking here about a driver and drivers don't appear in ARP.

>when i insert USB Scanner It popping up with hardware wizard??
Yes, because the driver isn't installed!

>i'm pasting my log file too..My log file is too large so i'm sending up last few lines where we look for error message.
Did I mention using the CODE tag? That is, just before you paste:

- type [square_bracket]CODE[square_bracket]
- paste your log file
- type [square_bracket]/CODE[square_bracket]

Obviously you will actually type the square bracket character, not the word [square_bracket]!
Posted by: AngelD 11 years ago
Red Belt
0
Reading from Device Class GUIDs for Popular Types of Hardware the "ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318}" represents: Serial and parallel ports, which I'm not sure DIFx/DPinst can handle.
Posted by: harshakola 11 years ago
Orange Belt
0
Hi Angel
Pls let me know how to come from this issue.Its very urgent Issue that needs to be reolved.
I know the driver template in windows doesn't work.So i using the normal template
I've created a folder called SQN Scanner drivers on C:\ Drive and copied all set of the files what i got .cat,.sys.inf.dll everything in to this folder.
Then gone to the merge module table and checked the box for module DIFx
then i went to the inf file in c:\SQN Scanner Drivers and went to the details tab and checked the box Use merge module.
Under the .inf i ve opened the details and opened the driver tab and did as u explained earlier.
Still i 'm seeing mesage when I'm trying to plugin USB Scanner i use to get an error message found newhardware. followed by the pop up windows.where is the olocation of the files and so it needs to take the files from C:\Scanner drivers...
Pls help me with this ISssue angel .
I've seen u helped many guys...
Thanks
Harsha
Posted by: harshakola 11 years ago
Orange Belt
0
Hi Angell
waiting for your reply....
Posted by: harshakola 11 years ago
Orange Belt
0
Hi angel
can u explain in detail abt this so that i can communicate with the vendor....
Posted by: harshakola 11 years ago
Orange Belt
0
gys pls post reponse for this issue
Rating comments in this legacy AppDeploy message board thread won't reorder them,
so that the conversation will remain readable.
 
This website uses cookies. By continuing to use this site and/or clicking the "Accept" button you are providing consent Quest Software and its affiliates do NOT sell the Personal Data you provide to us either when you register on our websites or when you do business with us. For more information about our Privacy Policy and our data protection efforts, please visit GDPR-HQ