Arie Voors 4nec2

Version: 5
Views: 3.5k  |  Created: 09/19/2007

Average Rating: 0
4nec2 has 1 inventory records, 0 Questions, 0 Blogs and 0 links. Please help add to this by sharing more!

Deployment Tips (3)

Most Common Setup Type
Not Determined
Average Package Difficulty Rating
Rated 0 / 5 (Not Rated) based on 0 ratings
Most Commonly Reported Deployment Method
Not Determined
or cancel
117
Note
To install “4nec2 - French” silently (command lines).

4nec2 is a completely free NEC based antenna modeler and optimizer by Arie Voors.

01. Obtain the sources

Download the files since 'http://home.ict.nl/~arivoors/'.

Decompress the file “Setup_4nec2.exe” in the repertory “d:\tmp\4nec2\source”.
Decompress the file “Setup_4nec2X.exe” in the repertory “d:\tmp\4nec2\source”.

02. Create Inno Setup .INF files

Create Inno Setup answer's files (.INF)

“d:\tmp\4nec2\source\Setup_4nec2.inf”
“d:\tmp\4nec2\source\Setup_4nec2X.inf”

with these contents:

[Setup]
Dir=C:\Program Files\4nec2
Group=Professionnel\4nec2
NoIcons=0
Components=


03. Install 4nec2 and 3D extension

03.a. Install 4nec2
start /wait d:\tmp\4nec2\source\Setup_4nec2.exe /VERYSILENT /SP- /LOADINF=d:\tmp\4nec2\source\Setup_4nec2.inf

03.b. Install 4nec2 3D extension
start /wait d:\tmp\4nec2\source\Setup_4nec2X.exe /VERYSILENT /SP- /LOADINF=d:\tmp\4nec2\source\Setup_4nec2X.inf

03.c. To personalize the configuration (See paragraph 04 below)
xcopy "d:\tmp\4nec2\source\Program Files\4nec2\*.ini" "c:\Program Files\4nec2" /s /e /h /i /r

03.d. To record the help file (See paragraph 05 below)
regedit.exe /s d:\tmp\4nec2\source\4nec2.reg


04. To personalize the configuration

Modify if required the sections of the file “C:\Program Files\4nec2\exe\4nec2.ini”.
Save this file “d:\tmp\4nec2\source\Program Files\4nec2\exe\4nec2.ini”.

05. Contents of 4nec2.reg

REGEDIT4

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Help]
"4nec2.hlp"="C:\\Program Files\\4nec2\\exe"

06. Security

To use the software 4nec2 as a member of the group of the local users you dever to modify permissions NTFS (ACLs) in the following way:

SETACL -on "C:\Program Files\4nec2" -ot file -actn setprot -op "dacl:p_c"
SETACL -on "C:\Program Files\4nec2" -ot file -actn trustee -trst "n1:CREATEUR PROPRIETAIRE;ta:remtrst;w:dacl"
SETACL -on "C:\Program Files\4nec2" -ot file -actn trustee -trst "n1:UTILISATEURS AVEC POUVOIR;ta:remtrst;w:dacl"
SETACL -on "C:\Program Files\4nec2" -ot file -actn ace -ace "n:UTILISATEURS;p:change"
SETACL -on "C:\Program Files\4nec2\archive.zip" -ot file -actn clear -clr "dacl" -actn setprot -op "dacl:p_nc;sacl:p_c" -actn ace -ace "n:administrateurs;p:full;s:n;i:so,sc;m:set;w:dacl"
SETACL -on "C:\Program Files\4nec2\archive.zip" -ot file -actn ace -ace "n:UTILISATEURS;p:read_ex;s:n;i:so,sc;m:set;w:dacl"
SETACL -on "C:\Program Files\4nec2\archive.zip" -ot file -actn ace -ace "n:SYSTEM;p:full;s:n;i:so,sc;m:set;w:dacl"

07. Links
Inno Setup command line
SetACL - Windows permission management
Setup Information:
Setup Type: unspecified
Deployment Method Used: unspecified
Deployment Difficulty: unspecified
Platform(s): Windows
Please log in to comment
117
Note
To install “4nec2 - French” silently (command lines).

4nec2 is a completely free NEC based antenna modeler and optimizer by Arie Voors.

01. Obtain the sources

Download the files since 'http://home.ict.nl/~arivoors/'.

Decompress the file “Setup_4nec2.exe” in the repertory “d:\tmp\4nec2\source”.
Decompress the file “Setup_4nec2X.exe” in the repertory “d:\tmp\4nec2\source”.

02. Create Inno Setup .INF files

Create Inno Setup answer's files (.INF)

“d:\tmp\4nec2\source\Setup_4nec2.inf”
“d:\tmp\4nec2\source\Setup_4nec2X.inf”

with these contents:

[Setup]
Dir=C:\Program Files\4nec2
Group=Professionnel\4nec2
NoIcons=0
Components=


03. Install 4nec2 and 3D extension

03.a. Install 4nec2
start /wait d:\tmp\4nec2\source\Setup_4nec2.exe /VERYSILENT /SP- /LOADINF=d:\tmp\4nec2\source\Setup_4nec2.inf

03.b. Install 4nec2 3D extension
start /wait d:\tmp\4nec2\source\Setup_4nec2X.exe /VERYSILENT /SP- /LOADINF=d:\tmp\4nec2\source\Setup_4nec2X.inf

03.c. To personalize the configuration (See paragraph 04 below)
xcopy "d:\tmp\4nec2\source\Program Files\4nec2\*.ini" "c:\Program Files\4nec2" /s /e /h /i /r

03.d. To record the help file (See paragraph 05 below)
regedit.exe /s d:\tmp\4nec2\source\4nec2.reg


04. To personalize the configuration

Modify if required the sections of the file “C:\Program Files\4nec2\exe\4nec2.ini”.
Save this file “d:\tmp\4nec2\source\Program Files\4nec2\exe\4nec2.ini”.

05. Contents of 4nec2.reg

REGEDIT4

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Help]
"4nec2.hlp"="C:\\Program Files\\4nec2\\exe"

06. Security

To use the software 4nec2 as a member of the group of the local users you dever to modify permissions NTFS (ACLs) in the following way:

SETACL -on "C:\Program Files\4nec2" -ot file -actn setprot -op "dacl:p_c"
SETACL -on "C:\Program Files\4nec2" -ot file -actn trustee -trst "n1:CREATEUR PROPRIETAIRE;ta:remtrst;w:dacl"
SETACL -on "C:\Program Files\4nec2" -ot file -actn trustee -trst "n1:UTILISATEURS AVEC POUVOIR;ta:remtrst;w:dacl"
SETACL -on "C:\Program Files\4nec2" -ot file -actn ace -ace "n:UTILISATEURS;p:change"
SETACL -on "C:\Program Files\4nec2\archive.zip" -ot file -actn clear -clr "dacl" -actn setprot -op "dacl:p_nc;sacl:p_c" -actn ace -ace "n:administrateurs;p:full;s:n;i:so,sc;m:set;w:dacl"
SETACL -on "C:\Program Files\4nec2\archive.zip" -ot file -actn ace -ace "n:UTILISATEURS;p:read_ex;s:n;i:so,sc;m:set;w:dacl"
SETACL -on "C:\Program Files\4nec2\archive.zip" -ot file -actn ace -ace "n:SYSTEM;p:full;s:n;i:so,sc;m:set;w:dacl"

07. Links
Inno Setup command line
SetACL - Windows permission management
Setup Information:
Setup Type: unspecified
Deployment Method Used: unspecified
Deployment Difficulty: unspecified
Platform(s): Windows
Please log in to comment
0
Command Line
To install "4nec2 - French" silently (command lines).

01. Obtain the sources

Download the files since 'http://home.ict.nl/~arivoors/'.

Decompress the file "Setup_4nec2.exe" in the repertory "d:\tmp\4nec2\source".
Decompress the file "Setup_4nec2X.exe" in the repertory "d:\tmp\4nec2\source".

02. Create Inno Setup .INF files

Create Inno Setup answer's files (.INF)

"d:\tmp\4nec2\source\Setup_4nec2.inf"
"d:\tmp\4nec2\source\Setup_4nec2X.inf"

with these contents:

[Setup]
Dir=C:\Program Files\4nec2
Group=Professionnel\4nec2
NoIcons=0
Components=


03. Install 4nec2 and 3D extension

03.a. Install 4nec2
start /wait d:\tmp\4nec2\source\Setup_4nec2.exe /VERYSILENT /SP- /LOADINF=d:\tmp\4nec2\source\Setup_4nec2.inf

03.b. Install 4nec2 3D extension
start /wait d:\tmp\4nec2\source\Setup_4nec2X.exe /VERYSILENT /SP- /LOADINF=d:\tmp\4nec2\source\Setup_4nec2X.inf

03.c. To personalize the configuration (See paragraph 04 below)
xcopy "d:\tmp\4nec2\source\Program Files\4nec2\*.ini" "c:\Program Files\4nec2" /s /e /h /i /r

03.d. To record the help file (See paragraph 05 below)
regedit.exe /s d:\tmp\4nec2\source\4nec2.reg


04. To personalize the configuration

Modify if required the sections of the file "C:\Program Files\4nec2\exe\4nec2.ini".
Save this file "d:\tmp\4nec2\source\Program Files\4nec2\exe\4nec2.ini".

05. Contents of 4nec2.reg

REGEDIT4

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Help]
"4nec2.hlp"="C:\\Program Files\\4nec2\\exe"

06. Security

To use the software 4nec2 as a member of the group of the local users you dever to modify permissions NTFS (ACLs) in the following way:

SETACL -on "C:\Program Files\4nec2" -ot file -actn setprot -op "dacl:p_c"
SETACL -on "C:\Program Files\4nec2" -ot file -actn trustee -trst "n1:CREATEUR PROPRIETAIRE;ta:remtrst;w:dacl"
SETACL -on "C:\Program Files\4nec2" -ot file -actn trustee -trst "n1:UTILISATEURS AVEC POUVOIR;ta:remtrst;w:dacl"
SETACL -on "C:\Program Files\4nec2" -ot file -actn ace -ace "n:UTILISATEURS;p:change"
SETACL -on "C:\Program Files\4nec2\archive.zip" -ot file -actn clear -clr "dacl" -actn setprot -op "dacl:p_nc;sacl:p_c" -actn ace -ace "n:administrateurs;p:full;s:n;i:so,sc;m:set;w:dacl"
SETACL -on "C:\Program Files\4nec2\archive.zip" -ot file -actn ace -ace "n:UTILISATEURS;p:read_ex;s:n;i:so,sc;m:set;w:dacl"
SETACL -on "C:\Program Files\4nec2\archive.zip" -ot file -actn ace -ace "n:SYSTEM;p:full;s:n;i:so,sc;m:set;w:dacl"
Setup Information:
Setup Type: unspecified
Deployment Method Used: unspecified
Deployment Difficulty: unspecified
Platform(s): Windows
Please log in to comment

Inventory Records (1)

View inventory records anonymously contributed by opt-in users of the K1000 Systems Management Appliance.

Versions

4nec2

Version

5

Questions & Answers (0)

Questions & Answers related to Arie Voors 4nec2

Blogs (0)

Blog posts related to Arie Voors 4nec2

Reviews (0)

Reviews related to Arie Voors 4nec2