Hi,

We deploy software through GPO, and after going through the Pacakage KB i opted for KJ's method (see notes at http://itninja.com/link/sap-front-end-installation-guide---release-7.10) to deploy SAPGUI 7.10 SP 16. I created a SAP Installation Server and made a single compressed file-installer with this tool. After that I created a new msi, added the newly created exe and a "exec program from installed files" custom action. The msi installs without any visible error, but when checking sapgui fails to start. The sapgui setuplog shows that some dll and ocx files failed to register. I included a part of the setuplog.


14:53:50 NwSapsAtlC 1 Installing Component '$LibRFC32 DLLs' with Id '{EFA947E6-5B5F-4198-9093-BFAEAFABA3DB}'
14:53:50 NwSapFeiKr 2 Attempting <InProc COM server file> installation: C:\DOCUME~1\admin\LOCALS~1\Temp\Temp.Sap\SapGUI716\Sap4\system\librfc32.dll --> C:\WINDOWS\system32\librfc32.dll
14:53:50 NwSapFeiKr 2 'C:\Documents and Settings\admin\Local Settings\Temp\Temp.Sap\SapGUI716\Sap4\system\librfc32.dll' successfully copied to 'C:\WINDOWS\system32\librfc32.dll'
14:53:56 NwSapFeiKr 2 SharedDllCounter for 'C:\WINDOWS\system32\librfc32.dll' has been set to 1
14:53:56 NwSapFeiKr 2 Attempting to register COM InProcServer C:\WINDOWS\system32\librfc32.dll
14:53:56 NwSapFeiKr 2 COM server is already registered as librfc32.dll
14:53:56 NwSapFeiKr 2W COM server is not registered with absolute path: Trying to locate file with SearchPath
14:53:56 NwSapFeiKr 2 Found registered file in C:\WINDOWS\system32
14:53:56 NwSapFeiKr 2 FileVersion of registered COM Server is: 7100.4.184.6405
14:53:56 NwSapFeiKr 2 FileVersion of COM Server to be installed is: 7100.4.184.6405
14:53:56 NwSapFeiKr 2 COM server versions are same: Performing new registration
14:53:56 NwSapFeiKr 2 Attempting to register COM server from reg file
14:53:56 NwSapFeiKr 2 Offline registration impossible: COR- file not found
14:53:56 NwSapFeiKr 2 Falling back to out of process self registration ( sapregsv.exe )
14:53:56 NwSapFeiKr 2 CreateProcess on: 'sapregsv.exe C:\WINDOWS\system32\librfc32.dll /s /w'
14:53:56 NwSapFeiKr 2W Registration with 'sapregsv.exe' failed: De toepassing kan niet worden gestart omdat de configuratie van de toepassing onjuist is. Het opnieuw installeren van de toepassing kan dit probleem oplossen.## Error code 0x36b1 (14001)
14:53:56 NwSapFeiKr 2 Falling back to registration with 'regsvr32.exe'
14:53:56 NwSapFeiKr 2 CreateProcess on 'C:\WINDOWS\system32\regsvr32.exe C:\WINDOWS\system32\librfc32.dll /s'
14:53:56 NwSapFeiKr 2E COM server out of process self registration failed! Reboot required.: Het systeem kan het opgegeven pad niet vinden.## Error code 0x3 (3)
14:53:56 NwSapFeiKr 2E The module C:\WINDOWS\system32\librfc32.dll could not be loaded due to unresolved module dependencies:
14:53:56 NwSapFeiKr 2E Module msvcr80.dll is unresolved
14:53:56 NwSapsEngn 1 Post Action Event Handler - Handling '{EFA947E6-5B5F-4198-9093-BFAEAFABA3DB}'
14:53:56 NwSapsEngn 1 Creating Workstation Document - 'C:\Program Files\SAP\SAPsetup\Setup\SapLibRfc32Wksta.xml'
14:53:56 NwSapsAtlC 1 Installed Component '$LibRFC32 DLLs' with Id '{EFA947E6-5B5F-4198-9093-BFAEAFABA3DB}'
14:53:56 NwSapsAtlC 1
14:53:56 NwSapsAtlC 1
14:53:56 NwSapsAtlC 1 Installing Component '$MS DLLs' with Id '{CCABD714-2B76-4969-BDFB-C02B48D5245C}'
14:53:56 NwSapFeiKr 2 Attempting <Dynamic link library file> installation: C:\DOCUME~1\admin\LOCALS~1\Temp\Temp.Sap\SapGUI716\Sap4\system\mfcans32.dll --> C:\WINDOWS\system32\mfcans32.dll
14:53:56 NwSapFeiKr 2 Target file C:\WINDOWS\system32\mfcans32.dll already exists
14:53:56 NwSapFeiKr 2 File version of source file is: 3.2.1.0
14:53:56 NwSapFeiKr 2 File version of target file is: 3.2.1.0
14:53:56 NwSapFeiKr 2 Target file version is same as source file version: Keeping existing file
14:53:56 NwSapFeiKr 2 SharedDllCounter for 'C:\WINDOWS\system32\mfcans32.dll' has been set to 4
14:53:56 NwSapsAtlC 1 Condition 'Windows XP=[Windows 2000,Windows XP,Windows 2003 Server]' evaluated to TRUE.
14:53:56 NwSapFeiKr 2 Attempting <InProc COM server file> installation: C:\DOCUME~1\admin\LOCALS~1\Temp\Temp.Sap\SapGUI716\Sap4\system\oc30.dll --> C:\WINDOWS\system32\oc30.dll
14:53:56 NwSapFeiKr 2 Target file C:\WINDOWS\system32\oc30.dll already exists
14:53:56 NwSapFeiKr 2 File version of source file is: 3.20.0.0
14:53:56 NwSapFeiKr 2 File version of target file is: 3.20.0.0
14:53:56 NwSapFeiKr 2 Target file version is same as source file version: Keeping existing file
14:53:56 NwSapFeiKr 2 SharedDllCounter for 'C:\WINDOWS\system32\oc30.dll' has been set to 4
14:53:56 NwSapFeiKr 2 Attempting to register COM InProcServer C:\WINDOWS\system32\oc30.dll
14:53:56 NwSapFeiKr 2 COM server C:\WINDOWS\system32\oc30.dll is already registered properly. Registering same version.
14:53:56 NwSapFeiKr 2 Attempting to register COM server from reg file
14:53:56 NwSapFeiKr 2 Offline registration impossible: COR- file not found
14:53:56 NwSapFeiKr 2 Falling back to out of process self registration ( sapregsv.exe )
14:53:56 NwSapFeiKr 2 CreateProcess on: 'sapregsv.exe C:\WINDOWS\system32\oc30.dll /s /w'
14:53:56 NwSapFeiKr 2 COM server out of process self registration succeeded
14:53:56 NwSapsAtlC 1 Component-State 'Install', Action-State='Install'
14:53:56 NwSapsAtlC 1 Executing script action...
14:53:56 NwSapsEngn 1 Script-Action: From 7.10 PL 12: Obsolete files vtssdl32.dll and vtssm32.dll not installed aymore!
14:53:56 NwSapsEngn 1 Post Action Event Handler - Handling '{CCABD714-2B76-4969-BDFB-C02B48D5245C}'
14:53:56 NwSapsEngn 1 Creating Workstation Document - 'C:\Program Files\SAP\SAPsetup\Setup\SapGuiWksta.xml'
14:53:56 NwSapsAtlC 1 Installed Component '$MS DLLs' with Id '{CCABD714-2B76-4969-BDFB-C02B48D5245C}'
14:53:56 NwSapsAtlC 1
14:53:56 NwSapsAtlC 1
14:53:56 NwSapsAtlC 1 Installing Component '$CleanSAPGUI6' with Id '{0C0E1CCC-18AE-431d-BE18-9BB872C88E72}'
14:53:56 NwSapsAtlC 1 Condition '0=1 &1=1 ' evaluated to FALSE.
14:53:56 NwSapsAtlC 1 Condition '0=1 &0=1 ' evaluated to FALSE.
14:53:56 NwSapsEngn 1 Post Action Event Handler - Handling '{0C0E1CCC-18AE-431d-BE18-9BB872C88E72}'
14:53:56 NwSapsAtlC 1 Installed Component '$CleanSAPGUI6' with Id '{0C0E1CCC-18AE-431d-BE18-9BB872C88E72}'
14:53:56 NwSapsAtlC 1
14:53:56 NwSapsAtlC 1
14:53:56 NwSapsAtlC 1 Installing Component '$CompInfo710' with Id '{30DC15B4-0C2E-4632-8A86-3AF0986B4921}'
14:53:56 NwSapFeiKr 2 Attempting <Data file> installation: C:\DOCUME~1\admin\LOCALS~1\Temp\Temp.Sap\SapGUI716\Sap4\SAPgui\compInfo710.txt --> C:\SAPGUI\SAPgui\compInfo710.txt
14:53:56 NwSapFeiKr 2 Target directory does not exist: Attempting to create directory C:\SAPGUI\SAPgui:
14:53:56 NwSapFeiKr 2 Directory creation succeeded
14:53:56 NwSapFeiKr 2 'C:\Documents and Settings\admin\Local Settings\Temp\Temp.Sap\SapGUI716\Sap4\sapgui\compInfo710.txt' successfully copied to 'C:\SAPGUI\SAPgui\compInfo710.txt'
14:53:56 NwSapsAtlC 1 Condition '1=0' evaluated to FALSE.
14:53:56 NwSapsAtlC 1 Condition '1=0' evaluated to FALSE.
14:53:56 NwSapsAtlC 1 Condition '1=0' evaluated to FALSE.
14:53:56 NwSapsEngn 1 Post Action Event Handler - Handling '{30DC15B4-0C2E-4632-8A86-3AF0986B4921}'
14:53:56 NwSapsAtlC 1W Workstation Designer: Invalid or empty target path
14:53:56 NwSapsAtlC 1W Workstation Designer: Invalid or empty target path
14:53:56 NwSapsAtlC 1W Workstation Designer: Invalid or empty target path
14:53:56 NwSapsAtlC 1 Installed Component '$CompInfo710' with Id '{30DC15B4-0C2E-4632-8A86-3AF0986B4921}'
14:53:56 NwSapsAtlC 1
14:53:56 NwSapsAtlC 1
14:53:56 NwSapsAtlC 1 Installing Component '$MS System Files' with Id '{F270A214-3AD3-4235-9C74-F4D323B54976}'
14:53:56 NwSapsAtlC 1 Component-State 'Install', Action-State='Install'
14:53:56 NwSapFeiKr 2 Attempting <Dynamic link library file> installation: C:\DOCUME~1\admin\LOCALS~1\Temp\Temp.Sap\SapGUI716\Sap4\system\msvcp60.dll --> C:\WINDOWS\system32\msvcp60.dll
14:53:56 NwSapFeiKr 2 Target file C:\WINDOWS\system32\msvcp60.dll already exists
14:53:56 NwSapFeiKr 2 File version of source file is: 6.0.8168.0
14:53:56 NwSapFeiKr 2 File version of target file is: 6.2.3104.0
14:53:56 NwSapFeiKr 2 Target file version is higher than source file version: Keeping existing file
14:53:56 NwSapFeiKr 2 SharedDllCounter for 'C:\WINDOWS\system32\msvcp60.dll' has been set to 6
14:53:56 NwSapsAtlC 1 Component-State 'Install', Action-State='Install'
14:53:56 NwSapFeiKr 2 Attempting <InProc COM server file> installation: C:\DOCUME~1\admin\LOCALS~1\Temp\Temp.Sap\SapGUI716\Sap4\system\msvbvm50.dll --> C:\WINDOWS\system32\msvbvm50.dll
14:53:56 NwSapFeiKr 2 Target file C:\WINDOWS\system32\msvbvm50.dll already exists
14:53:57 NwSapFeiKr 2 File version of source file is: 5.2.82.44
14:53:57 NwSapFeiKr 2 File version of target file is: 5.2.82.44
14:53:57 NwSapFeiKr 2 Target file version is same as source file version: Keeping existing file
14:53:57 NwSapFeiKr 2 SharedDllCounter for 'C:\WINDOWS\system32\msvbvm50.dll' has been set to 5
14:53:57 NwSapFeiKr 2 Attempting to register COM InProcServer C:\WINDOWS\system32\msvbvm50.dll
14:53:57 NwSapFeiKr 2 Attempting to register COM server from reg file
14:53:57 NwSapFeiKr 2 Offline registration impossible: COR- file not found
14:53:57 NwSapFeiKr 2 Falling back to out of process self registration ( sapregsv.exe )
14:53:57 NwSapFeiKr 2 CreateProcess on: 'sapregsv.exe C:\WINDOWS\system32\msvbvm50.dll /s /w'
14:53:57 NwSapFeiKr 2 COM server out of process self registration succeeded
14:53:57 NwSapsAtlC 1 Component-State 'Install', Action-State='Install'
14:53:57 NwSapFeiKr 2 Attempting <InProc COM server file> installation: C:\DOCUME~1\admin\LOCALS~1\Temp\Temp.Sap\SapGUI716\Sap4\system\msvbvm60.dll --> C:\WINDOWS\system32\msvbvm60.dll
14:53:57 NwSapFeiKr 2 Target file C:\WINDOWS\system32\msvbvm60.dll already exists
14:53:57 NwSapFeiKr 2 File version of source file is: 6.0.84.95
14:53:57 NwSapFeiKr 2 File version of target file is: 6.0.98.2
14:53:57 NwSapFeiKr 2 Target file version is higher than source file version: Keeping existing file
14:53:57 NwSapFeiKr 2 SharedDllCounter for 'C:\WINDOWS\system32\msvbvm60.dll' has been set to 8
14:53:57 NwSapFeiKr 2 Attempting to register COM InProcServer C:\WINDOWS\system32\msvbvm60.dll
14:53:57 NwSapFeiKr 2 Attempting to register COM server from reg file
14:53:57 NwSapFeiKr 2 Offline registration impossible: COR- file not found
14:53:57 NwSapFeiKr 2 Falling back to out of process self registration ( sapregsv.exe )
14:53:57 NwSapFeiKr 2 CreateProcess on: 'sapregsv.exe C:\WINDOWS\system32\msvbvm60.dll /s /w'
14:53:57 NwSapFeiKr 2 COM server out of process self registration succeeded
14:53:57 NwSapsAtlC 1 Component-State 'Install', Action-State='Install'
14:53:57 NwSapFeiKr 2 Attempting <InProc COM server file> installation: C:\DOCUME~1\admin\LOCALS~1\Temp\Temp.Sap\SapGUI716\Sap4\system\grid32.ocx --> C:\WINDOWS\system32\grid32.ocx
14:53:57 NwSapFeiKr 2 Target file C:\WINDOWS\system32\grid32.ocx already exists
14:53:57 NwSapFeiKr 2 File version of source file is: 4.0.29.8
14:53:57 NwSapFeiKr 2 File version of target file is: 4.0.29.8
14:53:57 NwSapFeiKr 2 Target file version is same as source file version: Keeping existing file
14:53:57 NwSapFeiKr 2 SharedDllCounter for 'C:\WINDOWS\system32\grid32.ocx' has been set to 5
14:53:57 NwSapFeiKr 2 Attempting to register COM InProcServer C:\WINDOWS\system32\grid32.ocx
14:53:57 NwSapFeiKr 2 COM server C:\WINDOWS\system32\grid32.ocx is already registered properly. Registering same version.
14:53:57 NwSapFeiKr 2 Attempting to register COM server from reg file
14:53:57 NwSapFeiKr 2 Offline registration impossible: COR- file not found
14:53:57 NwSapFeiKr 2 Falling back to out of process self registration ( sapregsv.exe )
14:53:57 NwSapFeiKr 2 CreateProcess on: 'sapregsv.exe C:\WINDOWS\system32\grid32.ocx /s /w'
14:53:57 NwSapFeiKr 2 COM server out of process self registration succeeded
14:53:57 NwSapsAtlC 1 Component-State 'Install', Action-State='Install'
14:53:57 NwSapFeiKr 2 Attempting <InProc COM server file> installation: C:\DOCUME~1\admin\LOCALS~1\Temp\Temp.Sap\SapGUI716\Sap4\system\tlbinf32.dll --> C:\WINDOWS\system32\tlbinf32.dll
14:53:57 NwSapFeiKr 2 Target file C:\WINDOWS\system32\tlbinf32.dll already exists
14:53:57 NwSapFeiKr 2 File version of source file is: 1.1.81.69
14:53:57 NwSapFeiKr 2 File version of target file is: 1.1.81.69
14:53:57 NwSapFeiKr 2 Target file version is same as source file version: Keeping existing file
14:53:57 NwSapFeiKr 2 SharedDllCounter for 'C:\WINDOWS\system32\tlbinf32.dll' has been set to 5
14:53:57 NwSapFeiKr 2 Attempting to register COM InProcServer C:\WINDOWS\system32\tlbinf32.dll
14:53:57 NwSapFeiKr 2 COM server C:\WINDOWS\system32\tlbinf32.dll is already registered properly. Registering same version.
14:53:57 NwSapFeiKr 2 Attempting to register COM server from reg file
14:53:57 NwSapFeiKr 2 Offline registration impossible: COR- file not found
14:53:57 NwSapFeiKr 2 Falling back to out of process self registration ( sapregsv.exe )
14:53:57 NwSapFeiKr 2 CreateProcess on: 'sapregsv.exe C:\WINDOWS\system32\tlbinf32.dll /s /w'
14:53:57 NwSapFeiKr 2 COM server out of process self registration succeeded
14:53:57 NwSapsAtlC 1 Component-State 'Install', Action-State='Install'
14:53:57 NwSapFeiKr 2 Attempting <InProc COM server file> installation: C:\DOCUME~1\admin\LOCALS~1\Temp\Temp.Sap\SapGUI716\Sap4\system\richtx32.ocx --> C:\WINDOWS\system32\richtx32.ocx
14:53:57 NwSapFeiKr 2 Target file C:\WINDOWS\system32\richtx32.ocx already exists
14:53:57 NwSapFeiKr 2 File version of source file is: 6.0.88.4
14:53:57 NwSapFeiKr 2 File version of target file is: 6.0.88.4
14:53:57 NwSapFeiKr 2 Target file version is same as source file version: Keeping existing file
14:53:57 NwSapFeiKr 2 SharedDllCounter for 'C:\WINDOWS\system32\richtx32.ocx' has been set to 5
14:53:57 NwSapFeiKr 2 Attempting to register COM InProcServer C:\WINDOWS\system32\richtx32.ocx
14:53:57 NwSapFeiKr 2 COM server C:\WINDOWS\system32\richtx32.ocx is already registered properly. Registering same version.
14:53:57 NwSapFeiKr 2 Attempting to register COM server from reg file
14:53:57 NwSapFeiKr 2 Offline registration impossible: COR- file not found
14:53:57 NwSapFeiKr 2 Falling back to out of process self registration ( sapregsv.exe )
14:53:57 NwSapFeiKr 2 CreateProcess on: 'sapregsv.exe C:\WINDOWS\system32\richtx32.ocx /s /w'
14:53:57 NwSapFeiKr 2 COM server out of process self registration succeeded
14:53:57 NwSapsAtlC 1 Component-State 'Install', Action-State='Install'
14:53:57 NwSapFeiKr 2 Attempting <InProc COM server file> installation: C:\DOCUME~1\admin\LOCALS~1\Temp\Temp.Sap\SapGUI716\Sap4\system\comct232.ocx --> C:\WINDOWS\system32\comct232.ocx
14:53:57 NwSapFeiKr 2 Target file C:\WINDOWS\system32\comct232.ocx already exists
14:53:57 NwSapFeiKr 2 File version of source file is: 6.0.80.22
14:53:57 NwSapFeiKr 2 File version of target file is: 6.0.80.22
14:53:57 NwSapFeiKr 2 Target file version is same as source file version: Keeping existing file
14:53:57 NwSapFeiKr 2 SharedDllCounter for 'C:\WINDOWS\system32\comct232.ocx' has been set to 5
14:53:57 NwSapFeiKr 2 Attempting to register COM InProcServer C:\WINDOWS\system32\comct232.ocx
14:53:57 NwSapFeiKr 2 COM server C:\WINDOWS\system32\comct232.ocx is already registered properly. Registering same version.
14:53:57 NwSapFeiKr 2 Attempting to register COM server from reg file
14:53:57 NwSapFeiKr 2 Offline registration impossible: COR- file not found
14:53:57 NwSapFeiKr 2 Falling back to out of process self registration ( sapregsv.exe )
14:53:57 NwSapFeiKr 2 CreateProcess on: 'sapregsv.exe C:\WINDOWS\system32\comct232.ocx /s /w'
14:53:57 NwSapFeiKr 2 COM server out of process self registration succeeded
14:53:57 NwSapsAtlC 1 Component-State 'Install', Action-State='Install'
14:53:57 NwSapFeiKr 2 Attempting <InProc COM server file> installation: C:\DOCUME~1\admin\LOCALS~1\Temp\Temp.Sap\SapGUI716\Sap4\system\comct332.ocx --> C:\WINDOWS\system32\comct332.ocx
14:53:57 NwSapFeiKr 2 Target file C:\WINDOWS\system32\comct332.ocx already exists
14:53:57 NwSapFeiKr 2 File version of source file is: 6.0.0.8450
14:53:57 NwSapFeiKr 2 File version of target file is: 6.0.0.8450
14:53:57 NwSapFeiKr 2 Target file version is same as source file version: Keeping existing file
14:53:57 NwSapFeiKr 2 SharedDllCounter for 'C:\WINDOWS\system32\comct332.ocx' has been set to 5
14:53:57 NwSapFeiKr 2 Attempting to register COM InProcServer C:\WINDOWS\system32\comct332.ocx
14:53:57 NwSapFeiKr 2 COM server C:\WINDOWS\system32\comct332.ocx is already registered properly. Registering same version.
14:53:57 NwSapFeiKr 2 Attempting to register COM server from reg file
14:53:57 NwSapFeiKr 2 Offline registration impossible: COR- file not found
14:53:57 NwSapFeiKr 2 Falling back to out of process self registration ( sapregsv.exe )
14:53:57 NwSapFeiKr 2 CreateProcess on: 'sapregsv.exe C:\WINDOWS\system32\comct332.ocx /s /w'
14:53:57 NwSapFeiKr 2 COM server out of process self registration succeeded
14:53:57 NwSapsAtlC 1 Component-State 'Install', Action-State='Install'
14:53:57 NwSapFeiKr 2 Attempting <InProc COM server file> installation: C:\DOCUME~1\admin\LOCALS~1\Temp\Temp.Sap\SapGUI716\Sap4\system\comctl32.ocx --> C:\WINDOWS\system32\comctl32.ocx
14:53:57 NwSapFeiKr 2 Target file C:\WINDOWS\system32\comctl32.ocx already exists
14:53:57 NwSapFeiKr 2 File version of source file is: 6.0.80.22
14:53:57 NwSapFeiKr 2 File version of target file is: 6.0.80.22
14:53:57 NwSapFeiKr 2 Target file version is same as source file version: Keeping existing file
14:53:57 NwSapFeiKr 2 SharedDllCounter for 'C:\WINDOWS\system32\comctl32.ocx' has been set to 5
14:53:57 NwSapFeiKr 2 Attempting to register COM InProcServer C:\WINDOWS\system32\comctl32.ocx
14:53:57 NwSapFeiKr 2 COM server C:\WINDOWS\system32\comctl32.ocx is already registered properly. Registering same version.
14:53:57 NwSapFeiKr 2 Attempting to register COM server from reg file
14:53:57 NwSapFeiKr 2 Offline registration impossible: COR- file not found
14:53:57 NwSapFeiKr 2 Falling back to out of process self registration ( sapregsv.exe )
14:53:57 NwSapFeiKr 2 CreateProcess on: 'sapregsv.exe C:\WINDOWS\system32\comctl32.ocx /s /w'
14:53:57 NwSapFeiKr 2 COM server out of process self registration succeeded
14:53:57 NwSapsAtlC 1 Component-State 'Install', Action-State='Install'
14:53:57 NwSapFeiKr 2 Attempting <InProc COM server file> installation: C:\DOCUME~1\admin\LOCALS~1\Temp\Temp.Sap\SapGUI716\Sap4\system\comdlg32.ocx --> C:\WINDOWS\system32\comdlg32.ocx
14:53:57 NwSapFeiKr 2 Target file C:\WINDOWS\system32\comdlg32.ocx already exists
14:53:57 NwSapFeiKr 2 File version of source file is: 6.0.84.18
14:53:57 NwSapFeiKr 2 File version of target file is: 6.0.84.18
14:53:57 NwSapFeiKr 2 Target file version is same as source file version: Keeping existing file
14:53:57 NwSapFeiKr 2 SharedDllCounter for 'C:\WINDOWS\system32\comdlg32.ocx' has been set to 5
14:53:57 NwSapFeiKr 2 Attempting to register COM InProcServer C:\WINDOWS\system32\comdlg32.ocx
14:53:57 NwSapFeiKr 2 COM server C:\WINDOWS\system32\comdlg32.ocx is already registered properly. Registering same version.
14:53:57 NwSapFeiKr 2 Attempting to register COM server from reg file
14:53:57 NwSapFeiKr 2 Offline registration impossible: COR- file not found
14:53:57 NwSapFeiKr 2 Falling back to out of process self registration ( sapregsv.exe )
14:53:57 NwSapFeiKr 2 CreateProcess on: 'sapregsv.exe C:\WINDOWS\system32\comdlg32.ocx /s /w'
14:53:58 NwSapFeiKr 2 COM server out of process self registration succeeded
14:53:58 NwSapsAtlC 1 Component-State 'Install', Action-State='Install'
14:53:58 NwSapFeiKr 2 Attempting <InProc COM server file> installation: C:\DOCUME~1\admin\LOCALS~1\Temp\Temp.Sap\SapGUI716\Sap4\system\mscomct2.ocx --> C:\WINDOWS\system32\mscomct2.ocx
14:53:58 NwSapFeiKr 2 Target file C:\WINDOWS\system32\mscomct2.ocx already exists
14:53:58 NwSapFeiKr 2 File version of source file is: 6.0.84.18
14:53:58 NwSapFeiKr 2 File version of target file is: 6.0.84.18
14:53:58 NwSapFeiKr 2 Target file version is same as source file version: Keeping existing file
14:53:58 NwSapFeiKr 2 SharedDllCounter for 'C:\WINDOWS\system32\mscomct2.ocx' has been set to 5
14:53:58 NwSapFeiKr 2 Attempting to register COM InProcServer C:\WINDOWS\system32\mscomct2.ocx
14:53:58 NwSapFeiKr 2 COM server C:\WINDOWS\system32\mscomct2.ocx is already registered properly. Registering same version.
14:53:58 NwSapFeiKr 2 Attempting to register COM server from reg file
14:53:58 NwSapFeiKr 2 Offline registration impossible: COR- file not found
14:53:58 NwSapFeiKr 2 Falling back to out of process self registration ( sapregsv.exe )
14:53:58 NwSapFeiKr 2 CreateProcess on: 'sapregsv.exe C:\WINDOWS\system32\mscomct2.ocx /s /w'
14:53:58 NwSapFeiKr 2 COM server out of process self registration succeeded
14:53:58 NwSapsAtlC 1 Component-State 'Install', Action-State='Install'


When i install the exe manually, sapgui starts without any errors. I haven't got a clue how to solve this. Any help will be appreciated.
0 Comments   [ + ] Show Comments

Comments

Please log in to comment

Rating comments in this legacy AppDeploy message board thread won't reorder them,
so that the conversation will remain readable.

Answers

0
What is the condition you have used to execute the CA.
Try calling the EXE from relative Path Instead.
Answered 03/25/2010 by: mekaywe
Brown Belt

Please log in to comment
0
Module msvcr80.dll is unresolvedIt seems the installer can't find the Visual C++ runtime it wants.
Answered 03/25/2010 by: VBScab
Red Belt

Please log in to comment
0
Dependency Walker will show you the version of the side-x-side VC++ dll [that VBScab refers to] is missing...
I believe from memory that it's VC++ SP1 that is missing - not 'One of our dinosaurs...'
Excuse the movie reference
Good luck,
Al
Answered 03/26/2010 by: AB
Purple Belt

Please log in to comment
0
I run the msi currently without any conditions. I tried calling the EXE from relative Path Instead, but this makes no difference.

After i gave Visual C++ runtime a closer look, i noticed that the single installer package contains vcredist_x86.msi which it tries to install. This installation does returns error 1618.

Windows Installer Error 1618
Another installation is already in progress. Complete that installation before proceeding with this install.
-------------------------------------------------------------------------------
You cannot have two separate instances of Windows Installer setups running at the same time. If you are using a custom action to trigger a second MSI setup, you will need to have your script wait for the wrapper script to close before proceeding.



How can i solve this?
Answered 03/26/2010 by: TalkingMarble
Orange Belt

Please log in to comment
2
Install the runtime as a dependency before running the SAP install. Add the MSI to the GPO containing the SAP package, then add the SAP package. You'll probably need to create a new GPO or remove the existing SAP package first, before adding the runtime MSI, then the SAP package.
Answered 03/26/2010 by: VBScab
Red Belt

Please log in to comment
Answer this question or Comment on this question for clarity